So—how does AmVet’s polyurea compare to inexpensive epoxy and common polyurea?
AmVet Concrete Coatings compares coatings using four real-world performance categories—impact resistance, stretch & flexibility, stains & spills, and UV stability—and the takeaway is straightforward: while epoxy floors are inexpensive and widely available, their impact resistance is quite low, and UV light can cause both epoxy and common polyurea to yellow or amber over time. In contrast, Penntek’s pure polyurea is chemically resistant for easier cleanup and is designed to withstand exposure to UV light, which is especially important for outdoor areas like pool decks, patios, and driveways.
Not All Floor Coatings Are the Same (And That Matters After Day One)
If you’ve been shopping for a concrete coating, you’ve probably noticed a funny trend: a lot of options look similar in photos. Shiny. Clean. “Like new.” The difference is what happens after the floor starts living a real life—foot traffic, dropped tools, weather, spills, sunlight… all of it.
At AmVet Concrete Coatings, the goal isn’t to follow the standard—it’s to deviate from the standard to exceed the standard. That’s why their epoxy vs. polyurea comparison focuses on performance tests that reflect what customers actually care about: will it hold up, will it flex, will it stain, and will it yellow?
Test #1: Impact Resistance (Because Floors Get Hit, Period.)
Impact resistance greatly affects long-term adhesion as well as the wear and tear of your floor coating. Translation: if a coating can’t take a hit, it’s going to show it—sooner rather than later.
In AmVet’s impact resistance comparison, the stated result is that epoxy floors, while inexpensive and widely available, have quite low impact resistance. If you’re looking for high impact resistance for a floor coating, AmVet recommends Penntek’s polyaspartic polyurea coatings, which are designed with high impact resistance.
Test #2: Stretch & Flexibility (Concrete Moves—Your Coating Should Too)
This one surprises people, but it makes perfect sense once you hear it: flexibility allows your concrete coating to bounce back and not chip or peel when impacted.
AmVet points out that for most residential installations, you’re dealing with floating slabs of concrete designed to flex and move with the shifting Earth. So the coating installed on top of that slab needs to be able to shift and move along with the substrate for a long-term coating solution. The stretch-and-flex conversation isn’t fluff—it’s about matching the coating to how concrete behaves in the real world.
Test #3: Stains & Spills (Because Life Happens and Floors Should Be Cleanable)
Spills happen. That’s not pessimism—that’s Tuesday.
AmVet’s comparison emphasizes that with Penntek’s pure polyurea, cleanup can be simple: for tough spills, all you need is a towel and a general purpose cleaner. That’s the benefit of a coating being described as chemically resistant—less drama when something hits the floor.
Test #4: UV Stability (Florida Sun Is a “Test” All By Itself)
If you live in Florida, you already know the sun doesn’t gently “shine.” It performs.
AmVet highlights a key issue: epoxy will yellow over time—and while polyurea is better, Penntek’s polyurea is especially designed to withstand exposure to UV light. They also note that UV light will make a common polyurea and epoxy floor coating yellow or amber over time.
This UV stability conversation matters even more when your concrete isn’t tucked away indoors. AmVet specifically calls out real use cases—pool decks to patios, driveways to garages—because those are exactly the surfaces that face constant weather and sunlight.
The 4 Things AmVet Tests for (And Why People Care)
If you like your decisions tidy, here’s the simple “why it matters” summary based on AmVet’s comparison categories:
Impact resistance affects long-term adhesion and wear and tear.
Flexibility helps a coating bounce back instead of chipping or peeling when impacted—especially important on floating slabs that move.
Chemical resistance matters because spills happen, and Penntek’s pure polyurea can be cleaned with a towel and general purpose cleaner.
UV stability matters because epoxy yellows over time, and UV light can cause both epoxy and common polyurea to yellow or amber—while Penntek’s polyurea is designed to withstand UV exposure.
Meet the Owners: The AmVet Story Behind the Floors
AmVet Concrete Coatings is led by Troy, born in 1967 in Petersburg, Illinois. He joined the Air Force straight out of high school and served for 33 years as a jet engine mechanic and production controller. Over that career, he earned five Commendation Medals, two Achievement Medals, and a Meritorious Service Medal, and he holds an Associate’s Degree in Production Management.
After retiring from the Air Force in September 2018, Troy moved to Merritt Island, Florida and built a new home there. He started AmVet Concrete Coatings with his friend Mark Huseman with the hope of helping the local community—and as they put it, the response has been overwhelming. Troy still lives and works in Merritt Island with his wife Candice, and they have three sons: Josh (33), Justin (30), and Colton (7).
What AmVet Coats: Residential, Commercial, and Industrial Concrete
One of the easiest misunderstandings in the coatings world is assuming it’s “just garage floors.” AmVet’s services span multiple categories.
For residential concrete coatings, they offer customizable floor coating products built to hold up to tough wear and tear for years to come, covering areas like garage floors, patios, pool decks, driveways, sidewalks, and more.
For commercial concrete coatings, their flooring solutions are designed to enhance the look and feel of spaces across a variety of businesses, including commercial floors, showrooms, service areas, restaurants, veterinary clinics, and more.
For industrial concrete coatings, their products are described as backed with a lifetime warranty and intended for spaces such as warehouse floor coatings, factories, production areas, automotive facilities, hangars, and more.
Where AmVet Works: Brevard County and Indian River County
AmVet serves a wide area across Brevard County and Indian River County, including communities throughout Brevard (such as Merritt Island, Melbourne, Palm Bay, Cocoa, Rockledge, Titusville, Satellite Beach, and more) and Indian River County (including Sebastian, Vero Beach, Fellsmere, Wabasso, and more).
Pick the Coating That Matches the Reality of Your Space
Epoxy is inexpensive and widely available—but AmVet’s comparison focuses on what happens when coatings meet real life: impacts, movement, spills, and sunlight. Their test categories are simple, but they’re the exact ones homeowners and business owners end up caring about once the “day one” shine wears off.
If you’re weighing epoxy vs. polyurea for a garage, patio, pool deck, driveway, or another concrete surface, AmVet’s approach is to compare the systems where it counts: impact resistance, flexibility, stain/spill cleanup, and UV stability. Contact AmVet today!